Skip to content

Incoterms 2020 Guide: EXW, FOB, CIF, DAP… Who Is Responsible for Loading and Damage?

Everyone publishes the "where does risk pass" table. The harder questions start at the loading dock: who loaded the cargo, who pays when a forklift drops a pallet, and who gets fined at the weighbridge? This guide covers ICC's 11 rules, then works through them with real export data, customs paperwork and 2026 freight conditions from Türkiye.

The 11 Incoterms 2020 rules: 7 for any mode, 4 for sea only; risk passes at origin under the F and C groups, at destination under the D group

Incoterms® 2020 decide the point at which risk and costs pass from seller to buyer. They settle loading responsibility clearly in only four rules: under EXW the seller is not obliged to load; under FCA with delivery at the seller's premises, the seller loads; under DAP the buyer unloads at destination; under DPU the seller does. Stowage, load securing, VGM and weighbridge fines sit outside Incoterms altogether and are governed by other rules. This guide puts all 11 rules in one table, then turns to the questions most guides skip: who loaded the cargo at the dock, who pays if it is damaged, and who gets fined at the weighbridge?

Short answer: Incoterms 2020 are the 11 trade rules published by the International Chamber of Commerce (ICC) and in force since 1 January 2020. Seven (EXW, FCA, CPT, CIP, DAP, DPU, DDP) work for any mode of transport; four (FAS, FOB, CFR, CIF) are for sea and inland waterway only. Each rule defines where risk and cost pass from seller to buyer. Payment, title and disputes stay with the sales contract.

Incoterms 2020 table: all 11 rules at a glance

The table shows, for each rule, where risk passes, who pays the main freight, who loads at origin and unloads at destination, and who must insure.

RuleModeRisk passes to buyerMain freightLoading (origin)Unloading (destination)Insurance
EXW (Ex Works)AnyWhen goods are placed at the buyer's disposal at the seller's premisesBuyerBuyer (risk stays with buyer even if seller loads)BuyerNone
FCA (Free Carrier)AnyOn delivery to the carrier (at seller's premises: once loaded)BuyerSeller (if delivery is at seller's premises)BuyerNone
CPT (Carriage Paid To)AnyOn delivery to the first carrierSellerSellerPer contract of carriageNone
CIP (Carriage and Insurance Paid To)AnyOn delivery to the first carrierSellerSellerPer contract of carriageSeller: Institute Cargo Clauses (A)
DAP (Delivered at Place)AnyAt destination, on the arriving vehicle, ready for unloadingSellerSellerBuyerNone (risk with seller)
DPU (Delivered at Place Unloaded)AnyAt destination, once unloadedSellerSellerSellerNone (risk with seller)
DDP (Delivered Duty Paid)AnyAt destination, ready for unloadingSellerSellerBuyerNone (risk with seller)
FAS (Free Alongside Ship)SeaAlongside the vessel (on the quay)BuyerBuyer loads onto vesselBuyerNone
FOB (Free on Board)SeaOnce on board the vesselBuyerSeller (onto the vessel)BuyerNone
CFR (Cost and Freight)SeaOnce on board the vesselSellerSellerPer contract of carriageNone
CIF (Cost, Insurance and Freight)SeaOnce on board the vesselSellerSellerPer contract of carriageSeller: Institute Cargo Clauses (C)
Source: ICC explanatory notes and ICC Q&A. The full rule text (A1–A10/B1–B10) is a copyrighted ICC publication; for contract-level precision rely on Incoterms® 2020, ICC Publication No. 723.

7 rules for any mode of transport

What is EXW?

Under EXW (Ex Works) the seller places the goods at the buyer's disposal at its own premises, and risk passes at that moment, before loading begins. Per the ICC text, the seller has no obligation to load, and export clearance is also the buyer's job. On paper it is the lightest rule for the seller, but when exporting from Türkiye it is usually still the seller who loads the truck and files the declaration (more in the loading-dock section).

What is FCA?

Under FCA (Free Carrier) the seller hands the goods to the carrier nominated by the buyer and clears them for export. There are two variants: if the named place is the seller's premises, delivery happens once the goods are loaded onto the buyer's vehicle, so the seller loads; if it is anywhere else (a forwarder's warehouse or a container yard), delivery happens when the goods are ready for unloading on the seller's vehicle, so the buyer unloads. New in 2020: if the parties agree, the buyer instructs its carrier to issue an on-board bill of lading to the seller, an option added mainly for letter-of-credit deals. The 2020 rules also recognise that the buyer may carry the goods in its own vehicle.

What are CPT and CIP?

Under CPT (Carriage Paid To) the seller contracts and pays for carriage to the named destination, but risk passes when the goods are handed to the first carrier. CIP (Carriage and Insurance Paid To) adds a seller insurance obligation. In 2020 the CIP cover was raised to Institute Cargo Clauses (A), i.e. "all risks" subject to exclusions; the parties can agree a different level. Unloading at destination follows the contract of carriage.

What is DAP?

Under DAP (Delivered at Place) the seller carries the goods to the named destination; delivery happens when they are ready for unloading on the arriving vehicle. Risk and freight up to that point are the seller's; unloading and import clearance are the buyer's. DAP does not mean "delivered unloaded"; that is the definition of DPU. The 2020 rules also recognise that the seller may carry the goods in its own vehicle under DAP, DPU and DDP.

What is DPU?

DPU (Delivered at Place Unloaded) replaced DAT in 2020. ICC describes it as a rename and a reordering: the destination no longer has to be a "terminal" and can be any place. The only difference from DAP is unloading: under DPU the seller unloads at destination and carries the risk until unloading is done. That is why DPU now comes after DAP in the list.

What is DDP?

DDP (Delivered Duty Paid) puts the most on the seller: carriage to destination, import clearance, and import duties and taxes. Delivery happens when the goods are ready for unloading at destination, so unloading is the buyer's. Because the seller takes on customs and tax formalities in the buyer's country, it only makes sense if you can actually handle them there.

4 rules for sea and inland waterway only

What is FAS?

Under FAS (Free Alongside Ship) the seller places the goods alongside the vessel at the port of loading, on the quay, and clears them for export; risk passes there. Loading onto the vessel is the buyer's job.

What is FOB?

FOB (Free on Board) means delivered on board: the seller loads the goods onto the vessel at the port of loading, clears them for export, and risk passes once they are on board. The buyer pays the main freight. FOB is often loosely described as delivery "alongside" the ship, but alongside is FAS; FOB requires the goods to be on board.

What is CFR?

Under CFR (Cost and Freight) the seller contracts and pays for carriage to the port of destination, but, as with FOB, risk passes once the goods are on board at the port of loading. The seller has no insurance obligation.

What is CIF?

CIF (Cost, Insurance and Freight) is CFR plus a seller insurance obligation. In 2020 the default cover stayed at Institute Cargo Clauses (C), narrower than the (A) cover under CIP. The seller buys the policy, but it is for the buyer's benefit, and the parties can agree wider cover.

Commonly confused rules

FOB vs CIF (and FCA)

CriterionFOBCIFFCA
Risk passes to buyerOnce on boardOnce on boardOn delivery to the carrier
Pays main freightBuyerSellerBuyer
Insurance obligationNoneSeller, (C) cover, for the buyer's benefitNone
Suitable for containers?Not per ICC; FCA recommendedNot per ICC; CIP recommendedYes
Under FOB and CIF risk passes at the same moment; the difference is who takes on freight and insurance.

CIF vs CFR

The only difference is insurance. Under both, the seller pays the freight and risk passes once the goods are on board; under CIF the seller also buys insurance for the buyer's benefit, at minimum Institute Cargo Clauses (C), while CFR carries no insurance obligation.

EXW vs FCA

The difference is loading and export clearance. Under EXW the seller does not have to load, risk passes before loading begins, and export clearance is the buyer's. Under "FCA [seller's premises]", loading and the risk during loading are clearly the seller's, and so is the export declaration. If your own forklift is loading the truck, FCA is the rule that describes what is actually happening.

DAP vs DPU

The difference is unloading. At a warehouse in Germany, unloading the truck is the buyer's job under DAP and the seller's under DPU; a pallet dropped by the forklift during unloading is at the buyer's risk under DAP and at the seller's under DPU. If the destination has no forklift or loading ramp, DPU is a risky promise for the seller.

Who is responsible at the loading dock? Loading, stowage, VGM and weighbridge fines

Per the ICC text, the EXW seller has no obligation to load; if it loads anyway, it does so at the buyer's risk and cost. Switzerland's export agency S-GE (2025) notes how this plays out: sellers often do the loading themselves because they want to help or have no other option. If damage occurs, the buyer is responsible, because risk passed before loading began. According to S-GE, even when EXW is formally agreed, FCA conditions are often what actually apply.

The consequence on the ground: a dock crew forklifting pallets into a truck at a Turkish factory under an EXW contract is working at the buyer's risk. If the forklift tips a pallet, the risk is legally the buyer's, but in practice a "who loaded it" dispute follows, and the seller's insurance may not cover it. The fix is either to use "FCA [seller's premises]", which clearly puts loading and the risk during loading on the seller, or to add an explicit clause to EXW such as "loaded at seller's risk". The phrase "EXW loaded" on its own does not settle who bears the risk.

Whatever the rule, whoever loads the truck owns the stowage and the axle and tonnage plan: the axle panel shows the load on each axle before loading starts.

Stowage and load securing sit in the same gap. Incoterms assign packaging to the seller under A4/A8 (packaging suitable for transport), but say nothing about stowage or lashing inside the vehicle; inn.law also points out that load securing is not regulated by the rules. Whoever loads is the de facto responsible party for stowage and securing, and in a damage case the question comes down to where delivery took place and whether the damage occurred before it. That is why planning weight distribution and axle loads before the truck arrives is how the loading party manages its own risk; it is what CargoDuo does.

Law 7574 and the weighbridge (Türkiye)

Türkiye's Law No. 7574, amending the Road Traffic Law, was passed on 12 February 2026 and took effect on publication in the Official Gazette (Resmî Gazete) of 27 February 2026, No. 33181. Fines for exceeding the maximum laden weight are tiered by the size of the overload and applied to the vehicle operator and the shipper separately:

Overload above maximum laden weightOperatorShipper
Up to 10%10,000 TL10,000 TL
Up to 15%20,000 TL20,000 TL
Up to 20%30,000 TL30,000 TL
Up to 25%40,000 TL40,000 TL
Over 25%60,000 TL60,000 TL
Law No. 7574 (Official Gazette No. 33181, 27 February 2026). Turkish administrative fines are revalued every year.

According to the Turkish General Directorate of Security (EGM) 2026 fines guide, the overload is calculated above a tolerance of 3.75% + 500 kg; with more than one shipper, the sum of the fines goes to the operator; if the shipper cannot be identified, only the operator is fined; and early payment earns a 25% discount. Under the law, vehicles that evade or obstruct weight and dimension checks are fined 60,000 TL. Exceeding a maximum axle weight (Road Traffic Law art. 65/1-c) costs the operator 10,000 TL, according to secondary sources. For the full table and the axle math, see our guide to truck overload fines in Türkiye.

How this relates to Incoterms: an administrative fine is public law and is not allocated by Incoterms. It is issued to whoever holds the status of "shipper" on the Turkish road leg. Even under EXW, where the buyer's forwarder arranges transport, if the Turkish seller's dock loads the truck, the party shown as shipper on the transport documents is usually the Turkish exporter. This is an interpretation of practice, not a legal opinion, and a recourse clause in the contract is advisable. Under FCA the seller loads anyway; under DAP the seller also arranges the transport. So whatever the rule, for an exporter loading trucks in Türkiye, the axle and tonnage plan is its own fine.

VGM: who declares the verified gross mass?

Under SOLAS Chapter VI, Regulation 2, since 1 July 2016 the party named as shipper on the bill of lading must declare the verified gross mass of a packed container; no VGM, no loading. In Türkiye the requirement is implemented through the Ministry of Transport's directive on determining and declaring the gross mass of packed containers (VDA notice), renewed on 27 March 2017. According to a Directorate General of Maritime Affairs letter (18 May 2026, No. 3646919) relayed in the Mersin Chamber of Shipping's circular 106/26, a new directive took effect with ministerial approval No. 3638154 of 12 May 2026, and it puts the Turkish term "DBA" (doğrulanmış brüt ağırlık) front and centre.

The Incoterms link: under FOB, CFR, CIF and FCA the seller usually stuffs the container, but under FOB the shipper on the bill of lading may be the buyer's forwarder. The responsible party is whoever is the shipper on the B/L. If the declared weight is wrong, the vessel's stowage plan, port penalties and delay costs land directly on that party.

Why FCA, not FOB, for containers

ICC's 2020 explanatory note on FOB says FOB is not appropriate where goods are handed to the carrier before they are on board, for example at a container terminal; FCA should be considered instead. The warning has been in the texts since 1990 and was reinforced in 2010, when the sea rules were placed in a separate group. The recommended container equivalents: FCA instead of FOB, CPT instead of CFR, CIP instead of CIF.

The logic is concrete. A sealed container dropped at the container yard in Mersin, Türkiye's main container port, sits with the terminal operator for days before it is loaded. Under FOB the seller carries the risk on cargo it no longer controls, and without opening the seal nobody can prove when damage occurred. For inside dimensions and capacity, see our shipping container dimensions guide.

There is a critical view too. According to a summary by Bob Ronai, a member of the ICC 2020 Drafting Group, FCA may largely fail to work in practice for ocean container cargo, because the buyer does not want to take on risk before the goods have actually been exported. That is why FOB remains dominant in practice.

Which rules does Türkiye actually use?

TÜİK, the Turkish Statistical Institute, does not publish this breakdown regularly. The only quantitative source is Arslandere (İşletme Bilimi Dergisi 9(1), April 2021), who obtained the data on request from TÜİK. Shares of Turkish exports by value, per rule:

YearFOBEXWFCACFRCIFDAPCIPCPTFASDDP
200246.8%6.1%4.6%14.4%16.4%–1.7%1.8%0.9%0.8%
201034.8%13.7%9.3%12.9%12.8%–4.1%2.5%2.3%1.6%
201529.0%14.9%12.5%11.8%12.0%7.1%5.2%3.0%2.6%1.8%
202021.0%17.9%16.3%12.3%10.6%9.5%4.3%3.5%2.8%1.8%
Source: Arslandere (2021), data requested from TÜİK; shares of Turkish export value.

FOB is still first, but its share nearly halved in 18 years, and EXW and FCA have closed most of the gap. The sea rules (FOB, CFR, CIF and FAS) fell from about 78.5% in 2002 to about 46.7% in 2020, consistent with the growth of road exports to Europe and wider use of FCA and DAP. No data for the years after 2020 has been published.

The same study surveyed 280 firms on a 7-point scale; mean usage scores were EXW 4.49, CIF 3.96, FOB 3.68, CFR 3.51, FCA 1.94, DAP 1.45 and DPU 1.39, with firms that export a smaller share of output using EXW more. The "about 32% of export declarations are EXW" figure from a customs broker's column in Dünya, a Turkish business daily, is a personal estimate drawn from the author's own roughly 10,000 files and based on declaration counts; it is not national data.

Incoterms on the Turkish customs declaration: box 20 and box 46

Under Annex 14 of Türkiye's Customs Regulation, box 20 ("Delivery terms") has three sub-boxes: the first takes the rule code, the second the name of the delivery place, and the third is left blank. The Ministry of Trade's public list of delivery-term codes is still labelled "(Incoterms 2010)" and still includes old codes such as DAF, DDU, DES and DEQ.

FOB also has a special role in statistics: in TÜİK foreign trade statistics exports are valued FOB and imports CIF (TÜİK microdata guide, 2025). Under a Ministry letter of 25 November 2014, box 46 (statistical value) on an export declaration must carry the FOB value in USD; for FOB and similar rules it is carried over automatically. An exporter selling CIF or DAP has to back out freight and insurance and declare the FOB-equivalent value separately, a calculation that is error-prone when freight rates swing.

On the import side, Türkiye's customs value includes freight and insurance up to the point of entry, so the 2026 war-risk surcharges also enlarge the tax base (a customs broker's March 2026 assessment).

Two real scenarios

Bursa → Stuttgart: 33 Euro pallets, full truckload

ItemEXW BursaFCA Bursa (seller's premises)DAP StuttgartDPU Stuttgart
Loading, stowage, lashingBuyer (risk unclear if seller actually loads)SellerSellerSeller
Turkish export declarationBuyer (in practice the seller)SellerSellerSeller
Turkish tonnage/axle fine riskWhoever holds shipper statusIn practice the sellerSellerSeller
Road freight, transit, Kapıkule border waitBuyerBuyerSellerSeller
Damage risk in transitBuyerBuyerSellerSeller
Unloading in StuttgartBuyerBuyerBuyerSeller
EU customs and import VATBuyerBuyerBuyerBuyer

FOB and CIF cannot be used for road transport, yet that is the most common mistake on road exports. Our recommendation: FCA if the buyer has its own forwarder, DAP if the buyer says "deliver to my door". Choose DPU only if you know the destination warehouse can unload. For how 33 pallets fit on the trailer, see how many pallets fit in a 13.6 m trailer.

Mersin → Jeddah: 40' HC container

ItemFOB MersinFCA Mersin CYCFR/CIF JeddahCPT/CIP JeddahDAP Riyadh
Container stuffing, stowage, VGMSeller (VGM: shipper on the B/L)SellerSellerSellerSeller
Risk transferOn loading on boardOn handover to the carrier at the CYOn loading on boardOn handover at the CYIn Riyadh
Freight + WRS/BAF increasesBuyerBuyerSellerSellerSeller
InsuranceNoneNoneCIF: (C)CIP: (A)Seller's own risk
Waiting at Jeddah and inland haulageBuyerBuyerBuyerBuyerSeller

For containerised cargo, ICC recommends FCA instead of FOB and CIP instead of CIF. On a letter-of-credit deal, use FCA's on-board bill of lading option. In 2026 Gulf conditions, DAP Riyadh is the riskiest quote for the seller because of surcharges and congestion at Jeddah. For container capacity, see how many pallets fit in a 40ft container; for the region's latest situation, our Red Sea and Hormuz shipping update.

2026 freight and war risk: who pays the surcharge?

  • Hormuz: the strait has been effectively closed to container ships since 28 February 2026.
  • Hapag-Lloyd: since 2 March 2026, until further notice, a war risk surcharge (WRS) on Upper Gulf, Arabian Gulf and Persian Gulf cargo. Per Reuters (1 March 2026) it is USD 1,500 per TEU for standard containers and USD 3,500 per container for reefers and special equipment; per Container News, it is paid by the booking party.
  • Maersk: its "Middle East Operational Update 40" of 22 July 2026 announced a USD 1,000 surcharge per container transiting Hormuz; per Update 41, it comes on top of an emergency freight tariff of USD 1,800 for a 20' dry container, USD 3,000 for a 40' and USD 3,800 for reefer/DG.
  • CMA CGM: a USD 65–165 per container emergency fuel surcharge since 1 August.
  • Freight: per Clarksons data cited by the FT, the 20' rate from Shanghai to the Gulf/Red Sea rose from USD 980 before the war to USD 4,131 in the week of 15 May (+321%). The Drewry WCI rose 1% on 13 August 2026 to USD 4,339 per 40' container; the same week Shanghai–Rotterdam fell 5% to USD 4,425 and Shanghai–Genoa fell 8% to USD 5,080 (see ocean freight rates 2026).
  • Jeddah: since 10 May, MSC has run a service that discharges at Jeddah and moves cargo on by road. Per data from TİM, the Turkish Exporters Assembly, Turkish exports to Saudi Arabia rose 23.5% in August while exports to Kuwait fell 72.2%.
  • Suez: in September 2026 carriers were gradually returning to Suez.
GroupFreight and later surchargesCargo risk
F group (EXW, FCA, FAS, FOB)Buyer pays; the exporter's price is protectedPasses to buyer on delivery at origin
C group (CFR, CIF, CPT, CIP)Seller pays; a WRS, BAF or fuel surcharge announced between quote and loading comes out of the seller's margin unless the contract says otherwisePasses to buyer at origin (CFR/CIF: on loading on board)
D group (DAP, DPU, DDP)Seller pays, including rerouting and waiting at Jeddah before deliveryStays with seller until delivery
Under the C group the seller carries the cost risk and the buyer the cargo risk; under the D group the seller carries both.

Our recommendation: in 2026 conditions, quote C and D rules with a short validity period and a clause stating that freight surcharges announced after the quote are passed on to the buyer. If the buyer won't accept that, move to FCA or FOB.

On insurance: war risk is covered under the standard Institute Cargo Clauses only by a separate clause. Under CIF, the seller's mandatory (C) cover does not automatically include war risk; if the buyer wants it, it has to be written into the contract.

5 things Incoterms do not cover

  • Transfer of title: who owns the goods, and when, is a matter for the sales contract.
  • Payment terms: method and timing (advance, letter of credit, open account) must be agreed separately.
  • Breach of contract and damages.
  • Force majeure.
  • Governing law and dispute resolution.
  • On top of that, per inn.law, Incoterms do not regulate load securing either.

When will Incoterms 2030 come out?

According to ICC Netherlands' announcement of 31 August 2026, ICC has begun revising the Incoterms 2020 rules, and final publication of Incoterms 2030 is currently planned for the end of 2029. National committees gather their members' views into a single national response for the ICC Drafting Group; the working documents are confidential. ICC Austria confirms the same timetable and states that Incoterms 2020 remains valid until then. For reference, in the 2020 revision the Drafting Group reviewed more than 3,000 substantive comments from national committees, with consultation rounds in April 2017, October 2017 and May 2018 (ICC). No draft of the new rules has been published; any "expected changes" in circulation are speculation.

Which rule should you quote?

  1. Start with the mode of transport. For road and container cargo, pick one of the seven any-mode rules; FOB, CFR and CIF are only for non-containerised sea cargo.
  2. Who loads? If you load the truck or container, write FCA, not EXW.
  3. Who should control the freight? If the buyer should, use the F group; if you take it on, use the C or D group, with a surcharge pass-through clause.
  4. Can the destination unload? Commit to DPU only if you know the destination has a forklift or ramp; otherwise DAP.
  5. Name the place and the version. "[Rule] [named place] Incoterms® 2020"; and check the volume behind your quote with the CBM calculator.

Frequently Asked Questions

How many rules are there in Incoterms 2020?

There are 11 rules. Seven (EXW, FCA, CPT, CIP, DAP, DPU, DDP) can be used for any mode of transport and four (FAS, FOB, CFR, CIF) for sea and inland waterway only; they have applied since 1 January 2020.

Is there an Incoterms 2026?

No, there is no Incoterms 2026; contracts should say "Incoterms 2020". ICC has started the revision, and according to ICC Netherlands (31 August 2026) Incoterms 2030 is planned for publication at the end of 2029.

Under EXW, who loads the goods, and who pays if they are damaged during loading?

Under the ICC text the EXW seller has no obligation to load; if it loads anyway, it does so at the buyer's risk and cost, so damage during loading is legally the buyer's risk. Because "who loaded it" disputes are common in practice, writing FCA (seller's premises) makes the risk clear if you load the truck yourself.

What is the difference between FOB and CIF?

Under FOB the buyer pays the main freight; under CIF the seller pays the freight and buys insurance with at least (C) cover for the buyer's benefit. Under both, risk passes when the goods are loaded on board at the port of loading.

What is the difference between CIF and CFR?

The only difference is insurance: under CIF the seller buys cover on Institute Cargo Clauses (C), while CFR has no insurance obligation. Freight is the seller's under both, and risk passes on loading on board under both.

Can FOB be used for container shipments?

Per ICC, FOB is not appropriate when the goods are handed to the carrier at a container terminal before they are on board, and FCA is recommended instead; by the same logic CPT replaces CFR and CIP replaces CIF. In practice, FOB nonetheless remains widely used for containers.

Can FOB or CIF be used for exports by road?

No, FOB and CIF are designed for sea and inland waterway transport only and cannot be used for road. For truck exports, FCA fits when the buyer has its own forwarder and DAP when the buyer wants delivery to its door.

What is the difference between DAP and DPU?

The difference is unloading: under DAP the buyer unloads at destination, under DPU the seller does. A pallet dropped during unloading is the buyer's risk under DAP and the seller's under DPU, so DPU is risky for the seller if the destination has no forklift or ramp.

Under CIF, who arranges the insurance and what does it cover?

The seller arranges the insurance, but it is for the buyer's benefit, and the default cover is Institute Cargo Clauses (C). The parties can agree wider cover; under CIP the default is (A).

If a truck is overweight at the weighbridge, does the Incoterms rule matter?

No, an administrative fine is public law and is not allocated by Incoterms; under Türkiye's Law No. 7574 the fine goes to the vehicle operator and the shipper separately. Even under EXW, if the Turkish seller loads the truck it is usually the one shown as shipper; this is an interpretation, so a recourse clause in the contract is advisable.

Who is responsible for the VGM?

Under SOLAS Chapter VI, Regulation 2, the party named as shipper on the bill of lading is responsible, and a container without a verified gross mass cannot be loaded. Under FOB that party may be the buyer's forwarder.

If a war-risk surcharge is added to the freight under CIF, who pays?

Under CIF the seller holds the contract of carriage, so a surcharge announced between quote and loading comes out of the seller's margin unless the contract says otherwise. The mandatory (C) insurance under CIF also does not automatically cover war risk; that cover has to be requested separately.

Which Incoterms rule is used most in Türkiye?

By value, FOB: according to TÜİK data published by Arslandere (2021), 21.0% of Turkish exports in 2020 were under FOB, 17.9% under EXW and 16.3% under FCA. FOB's share has nearly halved from 46.8% in 2002, and no data after 2020 has been published.

When will Incoterms 2030 come into force?

According to ICC Netherlands (31 August 2026), final publication of Incoterms 2030 is planned for the end of 2029. Until then Incoterms 2020 remains valid, and no draft of the new rules has been published.

Last updated 7 November 2026. Freight, surcharge and Hormuz figures move fast, and the Law 7574 fines are revalued every year. The authoritative text of the rules is ICC's Incoterms® 2020 publication (ICC Publication No. 723); this article is for information only and is not legal advice. Written by the CargoDuo team.

WRITTEN BY
Ashley from CargoDuo
Product, CargoDuo
ALL POSTS BY Ashley from CargoDuo

Ashley works on the product team at CargoDuo and writes our load planning guides and release notes. Spotted a mistake? Write to ashley@cargoduo.com.